AT&T 944 Making or Answering a Call

NOTE: When you make a call,the phone selects the Prime Line you

programmed. When you answer a call, the phone automatically selects

the ringing line.

Making or Answering a Call

NOTE: This phone will automatically make and answer calls in the mode

(speakerphone or headset) you programmed (see “Set Automatic Audio

Mode”in FEATURE SETUP). Follow the directions below to choose a mode

manually. If the phone is in use on one line, any other calls made

or answered will use the same mode already in use.

NOTE: If you dial a phone number longer than 15 digits,the screen

will display only the last 13 digits.

To make a call, lift the handset and dial the call.

To answer a call, lift the handset. Replace the handset to end the call.

To override automatic line selection, lift the handset,then press and

release a LINE button

— OR —

Press the LINE button for the line you wish to select,then lift the handset.

To make a call, press and release the desired LINE button or K.

The SPEAKER light goes on. Wait for a dial tone,then dial the call.

To answer a call, press Kor press the LINE button of the incoming

call. Press Kagain to end the call.

NOTE: If headset is programmed as the default mode (see “Set

Automatic Audio Mode”in FEATURE SETUP), you must pressKto

activate the speakerphone.

You can use this phone hands-free when you install a 2.5mm headset.

Headsets are available for purchase in retail stores (comcode #108041732)

or by calling 1 800 222-3111.

Make sure the headset is plugged into the headset jack located to the left

of the handset jack on the left side of the telephone base. You will hear a

double-beep if you press hand the headset is not plugged in.

NOTE: If headset is programmed as the default mode, (see “Set

Automatic Audio Mode”in FEATURE SET UP) but the headset is not

plugged in, the phone will switch to speakerphone.

TELEPHONE OPERATION