FEATURE SET UP

Select the Ringer Type

1Press G.

2Press -until the screen displays RINGER TYPE, then press >.

3Press -or +to select the desired setting. You will hear a sample of each ringer type as you move through the settings.

4Press Sto store your selection.

Set Delay Ring

Set the length of time before incoming calls will ring at this extension.

1Press G.

2Press -until the screen displays DELAY RING, then press >.

3Press -or +to select the desired setting. (One ring is about six seconds.)

4Press Sto store your selection.

Turn Line Usage On or Off for Each Line

If you are not using all four phone lines, you need to turn off Line Usage for the unused lines. If you expand to a third or fourth line, turn Line Usage back on.

You may also restrict the use of certain lines on this phone to intercom and paging only, by turning off Line Usage for each line to be restricted. When Line Usage is turned off, that line cannot be used to answer incoming calls or to make outgoing or transfer calls.

1Press G.

2Press -until the screen displays LINE USAGE, then press >.

3Press -or +until the screen displays the desired line number, then press >.

4Press -or +to change the setting.

5Press Sto store your selection.

6Repeat Steps 1-5to change the Line Usage status for additional lines.

15

Page 16
Image 16
AT&T 944 user manual Select the Ringer Type, Set Delay Ring, Turn Line Usage On or Off for Each Line