Transfer a Call, Low Battery Indicator, To drop one line | AT&T 944

TELEPHONE OPERATION

To talk privately with one party:

1Press Hto place both lines on hold.

2Press a LINE button to talk privately with the person on that line.

3Press Cto resume the conference call.

To drop one line:

Press the LINE button of the party you want to keep. The other line will be dropped.

NOTE: Occasionally, the far-end parties on a conference call might not hear one another.

Transfer a Call

You can transfer a call you answer to any other system phone. Once you transfer a call, it can be picked up at any other system phone, not just at the extension you called.

While on a call:

1Press T.

2Enter the extension number where you’re transferring the call.

3Hang up.

Your phone reminds you with a double-beep every 30 seconds when a transferred call has not been answered.

To answer a transferred call, pick up the handset or press the LINE button of the call to use the speakerphone or headset. You will know an incoming call is a transferred call by the distinctive long rings.

NOTE: If you do not dial an extension within 10 seconds, the transfer is automatically cancelled.

NOTE: If a transferred call is not picked up within 20 minutes, the phone will automatically disconnect the call.

Low Battery Indicator

The screen displays LOW BATT when the battery needs to be replaced, or when no battery is installed.

26

Image 27

AT&T 944 user manual Transfer a Call, Low Battery Indicator, To talk privately with one party, To drop one line

Contents

Part 1 Important Product Information Four-Line Intercom Speakerphone Contents Before YOU Begin Glossary Feature Function Setting Options Features List When you hear It means Audible Signals Installation Table/Desk InstallationInstall one 9V battery Two Two-Line Jacks Connect the telephone line cords to the telephone Wall Installation Install one 9V battery Mount the phone on the wall Connect the power adapter to the telephone Two Two-Line Jacks Convenience Ports Feature Options Feature SET UP Set the Time/Date Assign an Extension Number to Your PhoneTurn the Ringer On or Off for Each Line Set Delay Ring Select the Ringer TypeTurn Line Usage On or Off for Each Line Assign the Prime Line Line Preference Assign the Line Group for this PhoneTurn Auto-Mute On or Off Turn Hold Reminder On or Off Set Audio ModeSet the Dial Mode Set the Flash Time Program the Centrex Console Delayed Ring Time Erase All Settings and Return the Phone to Default SettingsSet Your Phone to be the Centrex Console Phone Telephone Operation Speakerphone Telephone OperationMaking or Answering a Call Handset Timer Switching ModesPause Restoring Call Privacy Canceling Call PrivacyCall Privacy Do Not Disturb Volume Line-in-Use LightsRedial Speakerphone or Headset Switch Between LinesAuto Redial Hold Conference Calls MuteFlash Temporary Tone Dialing To drop one line Low Battery IndicatorTransfer a Call To talk privately with one party Speed Dial Operation Storing a Number in a Speed Dial Location Reviewing a Speed Dial EntryMaking a Speed Dial Call Intercom Operation Making an Intercom Call with the Handset Basic Intercom Operations Making a Single-phone Switching Between an Intercom Call and a Single-phoneMaking an Intercom Call with the Speakerphone or Headset Answering an Intercom Call Room Monitor Paging All PhonesAnswering a System-wide Making an Intercom Conference Call Adding a FAX Machine Using a Fax Switch Telephone Does Not Ring Intercom Paging Signal Not ReceivedLine Lights Remain On When No Line is Connected Case of Difficulty Tone Signals Do Not Activate a Remote Device Operation During a Power FailureDisplay Screen is Blank Line Groups Expanding the Phone System Private Lines Console Operation Setup ChecklistCentrex Operation Enabling the Console Phone Setting Ring Delay Duration Answering a Delayed RingPicking Up Another Station’s Line Index Audio Mode 4 Reset ALL Advanced American Telephones. All rights reserved