![](/images/new-backgrounds/1257392/25739229x1.webp)
Getting started
Installation options
3.Plug one end of the telephone line cord into the TEL LINE jack on the back of the telephone base. Route the telephone line cord through the slot. Bundle the telephone line cord and secure it with a twist tie. Place the bundled telephone line cord inside the bracket.
4.Plug the other end of the telephone line cord into a telephone wall jack.
DSL filter (not included)
is required if you have DSL
5.Place the telephone just above the mounting studs of the mounting plate. Slide the telephone down until the telephone is held securely on the mounting studs. Place the handset in the telephone base.
6.Rotate the top of the display up or down to adjust the angle of the screen for maximum visibility.
10