![](/images/new-backgrounds/1257392/25739225x1.webp)
Getting started
Telephone installation
If you subscribe to
Follow the steps below to install the telephone.
1.Plug one end of the coiled handset cord into the handset jack on the left side of the telephone base. Plug the other end into the handset and hang up.
Handset
Coiled handset cord
2.Plug one end of the telephone line cord into the TEL LINE jack on the back of the telephone base. Plug the other end of the telephone line cord into a telephone wall jack.
Telephone wall jack
DSL filter (not included) is required if you have DSL
3.Lift the handset or press SPEAKER to check for a dial tone.
4.Rotate the top of the display up or down to adjust the angle of the screen for maximum visibility.