Directory
blinking
REVIEW STORE
ENTER NUMBER
8003604121_
ENTER NAME
8003604121
ROBERT BROWN
8003604121
STORED
ENTER NUMBER
_
Directory storage
Use the following steps to store a name and telephone number in the directory.
1.When the telephone is idle, press DIR/
to enter the directory.
2.Press DIR/
or CID/
until STORE is blinking.
3.Press SELECT, the screen shows ENTER NUMBER.
4.Use the dial pad keys to enter the telephone number (up to 24 digits).
•To backspace and erase a digit, press DIR/
.
•To insert a space between digits, press CID/
. A dash appears on the screen.
•To insert a 
twice. A P appears on the screen.
•To insert a flash signal for using the service supplied by your telephone service provider, press FLASH. An F appears on the screen.
•To copy the last number dialed (up to 24 digits), press REDIAL.
5.Press SELECT. The screen shows ENTER NAME.
6.Use the dial pad keys and Character chart on page 26 to enter the letters, digits or symbols (up to 15 characters). Press the key repeatedly until the desired character shows on the screen.
•To backspace and erase a character, press
DIR/
.
•To insert a space, press CID/
.
7.Press SELECT to save the entry. The screen shows STORED and then ENTER NUMBER.
28
