AT&T Not Availab installation instructions Installation, Checklist of Parts

Installation

Use the following procedures to install your CALLMASTER voice terminal.

IMPORTANT: ‘‘DEFINITY CALLMASTER II and CALLMASTER III Instructions for Programming the Options,’’ 555-015-169, is a brief set of instructions which includes procedures for setting the display for 1 or 2 lines and for controlling the Mute button. For the CALLMASTER II, there are procedures for enabling or disabling the Recorder Interface, and the Recording Warning Tones. For the CALLMASTER III, there are procedures for setting the headset volume. It is important that ONLY a service technician or the system manager program these options. This document is orderable from the documentation center listed at the front of this book.

CHECKLIST OF PARTS

The CALLMASTER II and CALLMASTER III voice terminal package includes the following items:

Either a CALLMASTER II Voice Terminal with Recorder Interface

or a CALLMASTER III Voice Terminal without Recorder Interface

(Both of these CALLMASTER voice terminal models come in black, misty cream, or white.)

Line Cord (7-foot, 8-wire D8W87 modular cord)

Button Designation Strips

(silver strips to be used with the black CALLMASTER; international gray strips to be used with the misty cream and the white CALLMASTER)

8