AT&T Not Availab Important Notes on Installation, Line jack, adjunct jack, and routing channels

Line Cord	LINE Jack	Adjunct Jack	Adjunct Jack
Routing			Routing
Channel			Channel

FIGURE 3 The LINE jack, adjunct jack, and routing channels

Important Notes on Installation

The total distance between the CALLMASTER II voice terminal with Recorder Interface and the recording device should not exceed 200 feet.

The distance between the CALLMASTER II or CALLMASTER III voice terminal and the PBX must NOT exceed the following:

In 4-wire mode, with 22-gauge or 24-gauge wire, the distance between the CALLMASTER II or CALLMASTER III and the PBX should not exceed 5,000 feet; with 26-gauge wire, the distance should not exceed 4,000 feet.

In 2-wire mode, which is applicable only to the CALLMASTER III, with 22-gauge wire, the distance between the CALLMASTER III and the PBX should not exceed 5,500 feet;

with 24-gauge wire, the distance should not exceed 3,500 feet; with 26-gauge wire, the distance should not exceed 2,200 feet.

The record output impedance is approximately 600 ohms and the output channel is isolated from the voice terminal with an FCC Part 68-approved voice transformer.

11