AT&T Not Availab installation instructions To adjust ringer volume if necessary, Self-Test

Select Ring (and Ringer Volume) (Continued)

You can raise or lower the volume of the tone ringer under the following conditions:

The CALLMASTER is on-hook, and the headset is unplugged

The voice terminal is off-hook on the external speakerphone

A call is ringing at the voice terminal

You are in the process of selecting a personalized ringing pattern for your voice terminal.

To adjust ringer volume if necessary

1To raise the volume, press the right half of the volume control button

labeled ;

to lower the volume, press the left half of the volume control button

labeled .

Display shows the volume level:

Ringer L > > > > H

(There are eight possible volume settings. On the display, one arrow indicates the lowest setting has been selected. Eight arrows indicates the highest setting has been selected.)

SELF-TEST

To test the lights and ringer of your voice terminal

1While on-hook, press Green light next to

Select

Select goes on

2 Press and hold Drop

Test

Three groups of lights go on in sequence

Ringer sounds

Display is activated

3 Release	Drop	to end test
	Test

Ringer, display, and lights return to pretest state; light next to Select goes off

22