Technical Description, Power Requirements | AT&T Not Availab

Technical Description

Physical Dimension and Weight

The CALLMASTER voice terminal can only be desk-mounted; it cannot be wall-mounted.

The CALLMASTER voice terminal measures

8.5inches deep

11.0inches wide

4.25lbs

Power Requirements

The CALLMASTER voice terminal is line powered from the PBX switch. The CALLMASTER will operate in voltage ranges of 42.5 to 56.5 volts. See the Installation section for operating range requirements.

NOTE: If adjunct equipment such as an S201A Speakerphone is connected to the CALLMASTER voice terminal’s Adjunct jack, it must be auxiliary powered.

Environmental Requirements

The CALLMASTER voice terminal can operate in temperatures ranging from 40 to 120 degrees F (4 to 48 degrees C) and relative humidity ranging from 5 to 95 percent.

Copyright © 1994 AT&T

All Rights Reserved

24

Image 30

AT&T Not Availab Technical Description, Physical Dimension and Weight, Power Requirements, Environmental Requirements

Contents

AT&T 555-015-168 Comcode 107319659 Issue 1, August Definity Warranty To Order Copies of this Document Hearing AID Compatibility Interference Warning Information Part 15 of FCC Rules Important Safety Instructions Service Contents Your Callmaster Voice Terminal Headset or the Handset Recorder Interface Organization of this Guide Conventions Feature Descriptions CallmasterPage To initiate a self-test of your voice terminal Headset jacks on the side of the Callmaster Installation Checklist of Parts Orderable Equipment Comcode Installing the Callmaster Voice Terminals Connecting the Line and Optional Equipment Cords Important Notes on Installation Line jack, adjunct jack, and routing channels Connector Block DCP Jack Interface DCP Line InterfacePage Callmaster Testing the Headset or Handset Labeling and Installing the BUTTON-DESIGNATION Strips Inserting the designation strips To raise or lower the receive volume Feature ProceduresRaising or Lowering Receive Volume Going OFF-HOOK Disconnecting from Calls Conference To add another party to an existing call Drop Hold To prevent the other party from hearing you Select Ring and Ringer VolumeMute To select a personalized ring To adjust ringer volume if necessary SELF-TESTTo test the lights and ringer of your voice terminal Transfer Technical Description Physical Dimension and WeightPower Requirements Environmental Requirements