AT&T TL 7610 No lifter mode or lifter mode, to NO LIFTER MODE, To change the answer mode

Getting started

Headset base installation

No lifter mode or lifter mode

There are two answer modes available on the headset base. The current mode is indicated

by the NO LIFTER MODE or LIFTER MODE lights on the front of the headset base.

• When plugging your headset base into the
telephone wall jack (installation option 1
or 2), make sure the headset base mode is set	MODE
to NO LIFTER MODE.
-OR-

•When connecting your headset base to a multiple line corded telephone (installation option 3), make sure the headset base mode is set to LIFTER MODE and that the LIFTER AUDIO ADJUST is switched for the best headset audio quality (see page 17).

To change the answer mode:

When the headset is not in use, press MODE on the headset base to select NO LIFTER MODE or LIFTER MODE. The corresponding light on the front of the headset base turns on to indicate the current mode.

For complete instructions on installing and using the handset lifter,

see the TL7100 handset lifter user’s manual. You may also download the manual at www.telephones.att.com/manuals.

NOTE: If you are using the handset lifter (TL7100 purchased separately), you must use LIFTER MODE.

11