AT&T TL 7610 Behind the neck band, To wear the headset on your left ear, Headset attachments

Getting started

Headset attachments

Behind the neck band

When first shipped, the ear pad of the neckband is positioned to be worn on the right ear.

To wear the headset on your left ear:

1.Remove the ear pad from the neckband by carefully pulling the stem of the ear pad up through the rectangular socket at the end of the neckband, as shown in Figure 11.

Ear pad

Figure 11

2.Snap the stem of the ear pad into the rectangular socket at the left end of the neckband.

To attach the neckband to the headset for wearing on the left or right ear:

1.Remove any headset attachment currently connected to the headset.

2.Insert the earpiece into the loop of the ear pad as shown in Figure 12.

3.Gently press the earpiece inward until it clicks into place as shown in Figure 13.

Figure 12 Figure 13

27