AT&T TL 7610 Headset base installation, CURLY CORD light blue dot jack on the headset base

Getting started

Headset base installation

Option 3: Headset base with corded phone for multiple line system or digital business system installation

To use this installation option, adjust the LIFTER AUDIO ADJUST switch to choose the best headset audio quality (see page 17). Make sure the headset base mode is set to LIFTER MODE.

•Plug the small end of the headset base power adapter into the POWER jack (green dot) at the back of the headset base.

•Plug the headset

base power adapter into an electrical outlet not controlled by a wall switch.

A DSL filter (not included) is required if you have DSL high-speed Internet service. The DSL filter must be plugged into the telephone wall jack.

•Plug one end of the 4-conductor telephone line cord into the

BASE JACK (orange dot) on the headset base.

•Unplug the curly handset cord from the telephone. Plug the end of the curly handset cord into the

CURLY CORD (light blue dot) jack on the headset base.

Curly handset

cord

• Plug the other end of the telephone line cord into a telephone jack.

• Plug one end of the	•
telephone line cord into
the telephone jack of the
corded phone.

Plug the other end of the 4-conductor telephone line cord into the handset jack of the corded phone.

16