AT&T TL 7610 user manual I cannot get a dial tone, Troubleshooting

Appendix

Troubleshooting

I cannot get a dial tone.

•First, try all the suggestions above.

•Move the cordless headset closer to the headset base. You might have moved out of range.

•If you are using LIFTER MODE, you might need to slide the LIFTER AUDIO ADJUST switch (page 17).

•If the previous suggestions do not work, disconnect the headset base from the telephone jack and connect a different phone. If there is no dial tone on that phone either, the problem is in your wiring or telephone service. Contact your telephone service provider.

•Your telephone line cord might be defective. Try installing a new telephone line cord.

Nothing happens when I slide LIFTER AUDIO ADJUST to get a clear dial tone.

•There is no need to change the LIFTER AUDIO ADJUST switch when you use NO LIFTER MODE. If you cannot get a dial tone, try all the suggestions above.

I am getting a buzzing sound on my headset or corded base speakerphone.

•Your telephone may experience interference from the headset. To overcome this problem, move the headset base at least 12 inches away from the telephone.

•Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless headset. Try installing your headset as far away as possible from these types of electronic devices.

37