Track Ride Construction Panel
Found on control panels for track rides:
1
4 7
2 | 3 | 8 |
| 5 | 6 | 12 |
10 | 9 | 11 |
|
Park Management Control Panel
Found on control panels for administration:
1
3 4
2
1.Construction Options – Expands the track options portion of the object control window, allowing you to build or change track pieces for the ride.
2.Track Pieces – Shows the tracks you can place next.
3.Lift – Adds or removes the chain drive for the highlighted track piece.
4.Loading Station – Toggles whether or not a boarding station is added to the highlighted track piece.
5.Block Brake – Toggles whether or not a block brake is added to the highlighted track piece. (For track rides with more than one train.)
6.Straight Brake – Toggles whether or not straight brakes are added to the highlighted track piece. (To reduce the speed of trains on a track ride.)
7.Photo Trigger – Toggles whether or not a photo trigger is added to the high- lighted track piece.
8.Bank – Adjusts the banking options for the highlighted track piece.
9.Remove – Removes the selected (or previous) track piece.
10.Autocomplete – Automatically places the remaining tracks for the coaster being edited. After an autocomplete solu- tion is found, click the icon again to accept the autocomplete solution, or click on another track piece to cancel.
11.Height markers – Click to turn the height markers on or off for this ride.
12.Special Tracks – Shows what special tracks may be added next. This selection changes depending on what piece has last been placed.
1.Pin – Minimizes the current window or toolbox and pins it to the edge of the screen
2.Scroll – Scrolls the list up and down.
3.Sort – Sorts the list by the selected criteria.
4.Dropdown – Causes a list to be displayed.
26 | 27 |
