KM0832 User Manual

(continued from previous page)

Setting

Function

 

 

SET PORT ID

A submenu appears with three selections:

 

ID POSITION—Allows you to position where the port ID appears

 

on the monitor. The default is the upper left corner, but you can

 

have it appear anywhere on the screen.

 

Use the mouse or the arrow keys plus [Page Up], [Page Down],

 

[Home], [End], and [5] (on the numeric keypad with [Num Lock]

 

off), to position the port ID display, then double-click or press

 

[Enter] to lock the position and return to the View submenu.

 

DISPLAY DURATION—Determines how long a port ID displays

 

on the monitor after a KVM port change has taken place. The

 

choices are:

 

USER DEFINED—which lets you select the amount of time

 

(from 1–240 sec.); and

 

ALWAYS ON—which displays the port ID at all times.

 

If you select USER DEFINED, key in the number of seconds,

 

then press [Enter]. The default is 3 seconds. A setting of 0

 

(zero) disables this function.

 

DISPLAY MODE—Selects how the port ID is displayed: the port

 

number plus the port name (PORT NUMBER + PC NAME); the

 

port number alone (PORT NUMBER); or the port name alone

 

(PC NAME). The default is PORT NUMBER + PC NAME.

 

 

SET SCAN

SCAN INTERVAL—Determines how long the focus dwells on

 

each KVM port as it cycles through the selected KVM ports in

 

Auto Scan mode (see F7 SCAN, p. 121). Enter a value from

 

0–240 seconds, and then press [Enter]. The default is 5 seconds.

 

Entering 0 will cause the KM0832 to automatically enter Skip

 

mode when Auto Scan mode is invoked.

 

SCAN MODE—Selects which computers will be accessed under

 

Auto Scan mode (see F7 SCAN, p. 121). Choices are:

 

PERSONAL—only those KVM ports that the user has set as

 

personal. See SET PERSONAL VIEW on p. 107.

 

ACCESSIBLE—only those KVM ports that the user is

 

permitted to access. See PORT ACCESS, p. 114.

 

ACCESSIBLE + POWERED—only those KVM ports that the

 

user is permitted to access and that have their attached

 

computers powered on.

 

The default is ACCESSIBLE + POWERED.

 

 

108