KM0832 User Manual

3.User Port LEDs

Lights (green) to indicate that the console module connected to the corresponding user port is online. Flashes when cascaded from the KVM port(s) of a parent KVM switch.

Condition

Indication

 

 

Steady

Console module is on

 

 

Flashing

User port is cascaded from a powered on KVM switch

 

 

Off

Console module is off

 

 

4.SYSTEM RESET Button

ŠPressing in this button performs a system reset. When the system is reset, the KM0832 beeps, and then the KVM port LEDs flash in succession until the reset is completed. After the reset is completed you can login again.

Note: This button is semi-recessed and must be pushed with a thin object—such as the end of a paper clip or a ballpoint pen.

5.USER PORT 1 Switch

This switch selects which USER PORT 1 is active—the one on the front panel or the rear panel. Set it to FRONT to activate USER PORT 1 on the front panel; set it to REAR to activate USER PORT 1 on the rear panel.

6.USER PORT 1 (Maintenance Port)

This user port is provided for convenient and easy access for system maintenance. It shares the same function with USER PORT 1 on the rear panel. By switching the USER PORT 1 switch to FRONT, USER PORT 1 on the rear panel is deactivated and USER PORT 1 on the front panel is activated. Use it just as you would any other user port. (You must return the USER PORT 1 switch to the REAR position to reactivate USER PORT 1 on the rear panel.)

8