KM0832 User Manual

Setting

Function

 

 

Change

Enter the old account password. Enter a new password, and then

Password

reenter the password to confirm it. Blank passwords are permitted.

 

Or, do not enter anything to leave the password unchanged.

 

 

OSD Activation

Selects which Hotkey activates the OSD function:

 

[Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl].

 

Since the Ctrl key combination may conflict with programs running

 

on the computers, the default is the Scroll Lock combination.

 

 

Set Logout

This function allows you to specify the number of minutes to elapse

Timeout

before an inactive user is timed out of the OSD. If there is no input

 

from the user for the specified amount of time, the user will be

 

logged out automatically. Enter a value from 1–180 minutes, then

 

click Save. A value of 0 disables this function. The default is 0

 

(disabled).

 

 

Screen Blanker

If there is no input from the KVM console for the amount of time set

 

with this function, the screen is blanked. Enter a value from 1–30

 

minutes, then click Save. A value of 0 disables this function. The

 

default is 0 (disabled).

 

 

Hotkey

Enables / Disables the Hotkey Command function in case a

Command

conflict with programs running on the computers occurs. The

 

default is enabled.

 

 

Set Beeper

When set to ON, the beeper sounds whenever the KVM port is

 

switched, when activating the Auto Scan mode (see page 121), or

 

when an invalid entry is made on an OSD menu. The default is ON.

 

 

Set Idle Timeout

If there is no input from the KVM console accessing a particular

 

KVM port for the amount of time set with this function, the KVM port

 

is released, allowing it to be accessed by the other KVM consoles.

 

To set the Idle Timeout value, enter a value from 0–240 seconds,

 

then click Save.

 

A value of 0 disables the Idle Timeout function. The default value is

 

5 seconds.

 

 

Restore User

Restores the original factory default settings for View Mode (OSD),

Default

Set Port ID, Display Duration, Set Scan, OSD Activation, Set

 

Logout Timeout, Screen Blanker, Hotkey Command, Set

 

Beeper, and Set Idle Timeout.

80