Chapter 1. Introduction
Features
Remote power on/off/reboot control for eight outlets via TCP/IP and a built in
Local power on/off/reboot control via the PN0108's PON port to the computer's
Daisy chain up to 15 additional stations to control up to 128 outlets
Manual switching between Local and Remote access for each port via front panel push button switches
Individual control of each port – users can set the power on sequence and delay time for each port to allow equipment to be turned on in the proper order
Easy setup and operation via a GUI interface
Provides three configuration/management methods: Browser; Telnet; or Console Terminal
Safe shutdown and rebooting for Windows systems*
Overcurrent protection and recovery for each AC port (110 V model only); total port overcurrent protection (both models) – remote users can monitor the current status via the GUI interface
Separate circuits for the unit's power and the power to the devices – the power control status menu is still accessible even when an overcurrent condition trips the devices' circuit breaker
On/Off scheduling – allows everything from a
Port grouping – perform the same action on a specified group of ports
LEDs for easy status monitoring
Two level (Administrator and User) security
Configuration can be reset
Firmware upgradeable – daisy chained stations receive the upgrade via the daisy chain bus
*Safe shutdown and rebooting is supported if the Power Monitor utility has been installed (see Automated Setup, page 48).
3