PN0108 User Manual
4.Slide the First Station's Firmware Upgrade switch to the RECOVER position.
a)Its Port LEDs blink at half second intervals.
b)The STATION ID LEDs display the word, UP, and blink at half second intervals.
5.Slide the First Station's Firmware Upgrade switch back to the NORMAL position.
a)The First Station's STATION ID LEDs display the Station ID's of all the daisy chained stations in sequence (01, 02, 03...)
b)After the First Station has run through the sequence, its STATION ID LEDs display the word, UP, and blink at 1 second intervals. Its Port LEDs also blink at 1 second intervals.
c)Next, all the Port LEDs on the daisy chained stations blink at 1 second intervals, and their STATION ID LEDs display the word, UP, which also blinks at 1 second intervals.
d)Finally, all STATION ID LEDs return to displaying their Station ID numbers, indicating that they are ready for the firmware upgrade procedure, and you may start the upgrade.
Note: 1. Each station is upgraded in turn. The STATION ID LEDs of the station currently receiving the upgrade display the word, UP, and blink at 1 second intervals. All other STATION ID LEDs display their station numbers, and also blink at 1 second intervals.
2.All stations restart automatically after they have been successfully upgraded.
54