Chapter 3. Logging In
5.The PN0108's serial port settings and the computer's COM port settings must be the same. Change the settings in your dialog box (if necessary), so that they match the PN0108's COM Port settings, then click OK.
Note: The PN0108's default settings are 38400 bps; 8 Data bits; No Parity;
1Stop bit.
6.When the HyperTerminal screen appears, open the File menu and select: Properties → Settings. The following dialog box displays:
7.Change the settings (if necessary), so that they match the settings shown in the diagram, then click ASCII Setup... The ASCII Setup dialog box comes up:
27