PN0108 User Manual
(Continued from previous page.)
No. | Item | Description |
|
|
|
3 | Power | Each button (A to H), controls the power status of its |
| Control | corresponding AC output port as follows: |
| Buttons | Pressing the button for less than 3 seconds toggles the port |
|
| |
|
| between Remote Access enabled and Remote Access disabled |
|
| (Local Mode). If Remote Access is disabled, the switch does not |
|
| allow the port to be managed from a remote connection. (The |
|
| Remote Access LED is off when Remote Access Mode has |
|
| been disabled for its corresponding port.) |
|
| Under Local Mode, pressing and holding the button in for more |
|
| than 3 seconds switches the power to its corresponding port On |
|
| or Off. |
|
|
|
4 | Reset | Pressing and holding this switch in for more that three seconds |
| Switch | resets the PN9108 to its factory default settings. This switch is |
|
| recessed and must be pushed with a thin object, such as the end |
|
| of a paper clip, or a ballpoint pen. |
|
|
|
5 | Station ID | The PN0108's Station ID displays here. If this is a Single Station |
| LED | installation (See Single Stage Installation, page 11, or the First |
|
| Station on a Daisy Chained installation (see Daisy Chaining, |
|
| page 13), the PN0108 has a Station ID of 01. |
|
|
|
6 | Power | This standard rocker switch powers the PN0108 On and Off. |
| Switch |
|
|
|
|
6