PN0108 User Manual

Rack Mounting

The PN0108 can be installed in most standard 19" (1U) racks. To rack mount the unit do the following:

1.Use the screws supplied with your rack mounting kit to attach the rack mounting brackets to each side of the device:

Phillips Hex Head

M3 x 8

Note: The unit can be installed either at the front or the back of the rack. To install it at the back, simply screw the brackets into the holes at the rear of the unit.

2.Position the device in the rack and align the holes in the mounting brackets with the hole in the rack.

3.Screw the mounting brackets to the rack.

Note: Cage nuts are provided for racks that are not prethreaded.

10