PN0108 User Manual

Firmware Upgrade Recovery

Single Station Recovery

To perform a firmware upgrade recovery, do the following:

1.Power the PN0108 OFF.

2.Slide the Firmware Upgrade switch to the RECOVER position.

3.Power the PN0108 back ON.

4.Repeat the upgrade procedure from the beginning.

5.After the upgrade, power the PN0108 OFF.

6.Slide the Firmware Upgrade switch to the NORMAL position.

7.Power the PN0108 back ON.

Daisy Chained Station Recovery

If any of the Stations on a daisy chained installation fails to complete the upgrade procedure successfully:

1.Disconnect it from the chain.

2.Connect your computer to its PON In port (with the PON Cable).

3.Perform the upgrade recovery procedure on it as for a single station recovery.

After the upgrade completes, connect it back into the chain.

60