PN0108 User Manual

(Continued from previous page.)

Heading

Meaning

 

 

Kill the Power

If this option is selected, the PN0108 waits for the

 

amount time set in the Power Off Delay field (see below),

 

and then turns the Outlet's power OFF when its Power

 

Button is clicked to turn off the power. Turning the power

 

off performs a cold (non-safe) shutdown. Selecting this

 

function disables the Reboot checkbox on the main

 

screen.

 

 

Confirmation Required

If this option is enabled (there is a check in the

 

checkbox), a dialog box comes up asking you to confirm

 

the operation before it is performed. If it is disabled (there

 

is no check in the checkbox), the operation is performed

 

without confirmation.

 

 

Power On Delay

Sets the amount of time the PN0108 waits after the

 

Power Button is clicked before it turns on the computer

 

attached to the corresponding outlet.

 

 

Power Off Delay

Sets the amount of time the PN0108 waits after the

 

Power Button is clicked before it shuts down the

 

computer attached to the corresponding outlet.

 

For the System after AC Back option, after the delay time

 

expires, the PN0108 waits another fifteen seconds, then

 

shuts the computer down.

 

The minimum (and default) delay time is 15 seconds. The

 

maximum delay time is 999 seconds.

 

 

To save your settings, Click Save. To exit without saving your changes, use your browser's Back function to go back to the Main web page, or click another button on the page to go to a different function.

*This function only works with computers capable of a Safe Power Shutdown. See step 3 of Single Stage Installation, page 11, and Chapter 6, Safe Shutdown and Reboot.

Outlet Groups:

Outlet groups allow power control actions to be carried out on the entire group at the same time, rather than repeatedly performing the same action on each individual outlet. You can have four outlet groups per station, and each group can be given a distinctive name. The maximum number of characters for the name is 15.

The bottom Configuration panel lets you select the outlets that you want to put together as an outlet group.

40