PN0108 User Manual

Device Selector

Since up to 16 PN0108 Stations can be daisy chained, this panel lists each of the Stations on your installation. The number in brackets, to the right of the title, indicates the total number of stations on the installation.

The names of the Stations are listed in the list box

below the title. To select a Station for power management, click on the arrow to drop the list down; then click to select the Station you want to work with. When you select a Station, its Power Status & Control screen displays in the large central panel.

Note: 1. Each PN0108's Station ID is displayed in the Station ID LED on its front panel (see Station ID LED, page 6).

2.The outlets in the Power Status & Control screen are only in effect for the Station that is selected in the Device Selector.

Device Control

With the exception of Status, the buttons in the Device Control panel are used by the Administrator to configure the power management options of the Station that is currently selected in the Device Selector panel. These functions are explained in Chapter 5, Administration.

Clicking the Status button brings up the Power Status screen for the currently selected device (see Device Selector, above). The Power Status Screen is discussed in the next section.

32