ATI Technologies GL 8800 specifications Adjustment Monitor Tuning . Check

Using Your Fire GL 8800 35

2Monitor Tuning:

Monitor Tuning is available only for VGA monitors. If you have two monitors connected to the Fire GL 8800:

Note Monitor 1 is the monitor connected to the VGA connector, Monitor 2 is the VGA monitor connected to the DVI connector.

• With the buttons in the Move and Size sections you can tune the position and size of the monitor's display for the indicated resolution and refresh rate

	(1) Use the hardware setting controls on your
	monitor, if available, to adjust your display size or
	position - instead of the software controls in
	'Adjustment - Monitor Tuning.' Check the
Notes	documentation of your monitor for information on
	your monitor's hardware controls

(2)Resizing the display slightly changes the actual refresh rate. If you operate a fixed-frequency monitor check the documentation of your monitor for information on refresh rate tolerances.

•Sync Polarity: If you do not get a satisfactory display with the default sync polarity setting for the current resolution, you may try and change the settings.

•Undo: Click this button to undo the last change you made (when you clicked Apply). If you have made a modification that causes your screen to go blank or to be unreadable, the keyboard shortcut for ‘Undo’ is Alt-U.

•Default: Click this button to set the Monitor Tuning to the manufacturer's default settings.