18 Installing the Hardware and Software
Connecting a Digital Flat-Panel (DFP) Monitor or Digital CRT Monitor
Securely attach the monitor’s data cable to the DVI output connector
(2)on the card. Attach the cable to the monitor according to the monitor's instructions. Please refer to the documentation that came with your monitor if you need additional installation information.
Setting the Monitor Impedance
If you can switch the impedance values on your monitor, use the following recommended settings:
•RGB video input: 75 Ohm
•Synch: 2.2 kOhm
Try other 'Synch' settings if you cannot achieve a stable video image.
If the impedance setting options are 'High' and 'Low' only, try the setting that provides the most satisfactory monitor display.
