Sendina
Q This section shows how to prepare a document and send it. it also shows how to take advantage of features that save time or improve the quality of your transmission, such as one- touch or speed dialing, changing resolution and contrast, and using your fax machine to make copies.
Sending a Document
1.Place the document face down and adjust the document guide to match the width of the document.
Note:, Slide the guide smoothly to the left or right. If you move it with great force, it might be broken.
2.Gently insert the leading edge of the document into the loading slot until you hear a beep tone and the machine has begun to grab the document(s). After the document is secured, the unit displays the standby mode. The document is now loaded and ready to send.
Bee
Notes:
•You can stack up to five sheets of paper at one time. Stagger the leading edge of the sheet
slightly and insert the sheets with a slight push to assure smooth feeding.
Be sure the bottom sheet enters first as shown below.
D If you want to add documents while sending, insert it into the loading slot so it is placed on the top of the preceding one as shown below
3.Pick up the handset and dial the number of the remote fax machine you want to send to. You can also use
4.When the line is answered:
If you hear a fax tone, press [START/COPY] and hang up. Your unit starts sending.
If you hear a voice, instruct the answerer to press the [START] on their unit. When you hear a tone, press [START/COPY] and hang
up.
If you hear a busy signal. press [START/COPY] and hang up the handset. Your unit automatically redial the number and send the document (see “AutomaticRedialing" on page 20).
5.When the last page has been sent, long beep sounds, and your unit hangs up.
Hint: To cancel sending at any time, press [STOP] twice.
19
