Audiovox afx-35 manual Controlling Transmission Quality, Preparing a Good Original, Making Copies

Controlling Transmission Quality

Preparing a Good Original

To prevent jamming and ensure good results on the receiving fax machine:

. Remove all staples, clips and tape from the original documents.

. If you must re-fax a document that was faxed to you, we recommend that you make a copy of it on a regular office copier, and fax the copy for better transmission quality.

To create good quality original documents, do the following:

•Type them instead of writing.

•When writing, use a felt-tip pen and black ink.

•Use white paper.

Do not try to send documents that are:

•Wet or damp

•Covered with wet ink or paste

•Too thin (such as onionskin, airmail paper or pages from a magazine)

•Chemically processed (such as pressure-sensitive paper or carboncoated paper)

•Coated (such as glossy paper)

•Too small or short (such as a label or card)

•Made of cloth or metal

Use an office copier to piece together several small originals or make a standard size copy of an original which is too small to load in your unit.

Page & Document Size Limitations

Your unit accepts original documents no smaller than 6 inches wide by 8.5 inches long, and no larger than 8.5 inches wide by 59 inches long.

Do not attempt to load 2 or more documents into the unit when the documents are too thin or too thick. These documents might fail in automatic feeding. Feed one sheet at a time. Refer to the following chart for acceptable thickness.

2 or more	Single sheet
sheets

Thickness of	0.08~0.13mm	0.075-0.15mm
Document

Jote: Make a standard copy by using an office :opier to send the document of unacceptable hickness.

Setting the Resolution

four unit allows to send a fax at a higher resolution. Jse FINE resolution to send very detailed documents with intricate drawings or small type. Transmission time will be increased if FINE, mode is set but the results will look better at the receiving end

Vote: A document must be loaded into the unit for :his function to be operated.

To send a fax in FINE resulution, press [FINE] Defore dialing, the FINE indicator lights to confirm ;hat the FINE mode is activated.

To see how your document will look at the receiving end, use your unit to make a copy with whatever settings you like (NORMAL or FINE mode).

Making Copies

Your fax unit doubles as a handy copy machine.

1.Load the document face down into the unit.

2.Adjust the resolution of document by using [FINE], if necessary.

3.Press [START/COPY].

Note: If you copy 2 or more pages, be sure the bottom sheet enters first.

23