Assemblina & Connecting continued
Connecting the Power
Plug the power cord to the power receptacle. Plug the other end of the cord into a properly grounded,
Note: Use an outlet not shared with equipment that generates electrical noise or consumes large amounts of electricity, such as an air conditioner or off ice copier.
Turning the Power “ON”
Press the Power switch to turn the unit on.
When you turn the power on, ‘SYSTEM INITIAL’ message appears briefly in the display window and all indicators light briefly. After a moment, all indicators are turned off, and the date, time are displayed. (If the displayed time and date are incorrect, don’t worry - you will change this information in a moment.). This confirms your unit works properly.
You may leave your unit on and standby mode 24 hours a day, 365 days a year.
Notes: If nothing appears in the window, make sure that:
•The power cord is properly connected and plugged into the wall jack.
•The wall jack is ‘live’ and not switched off by a wall switch or blown fuse.
Choosing Dial Mode
Set the DIAL Mode switch on the left side of the unit for the type of service you have (pulse or tone).
If you are not sure which type of service you have, do this simple test.
1.Lift the handset and listen for a dial tone.
2.Press any number other than 0. If the dial tone stops, you have a
3.If the dial tone continues, set the DIAL MODE switch to “PULSE”.
9
