BASIC FUNCTIONS
PAUSE FEATURE
Pauses are used for automated systems (i.e., voice mail and calling cards). Insert a pause after a phone number, then enter another group of numbers. The second set of numbers is dialed automatically after the pause. This feature is useful for dialing into systems that require a code.
1.Enter the phone number, then press 
.
2.Select desired pause. "P" or "T" will appear after the number to represent the pause.
BASIC FUNCTIONS
SPEAKERPHONE
1.To activate the speakerphone in idle, answering or calling mode, press and hold 
.
2.After you have ended your call, speakerphone mode turns off.
The phone resets to Speakerphone Off when it turns off and back on.
ANSWERING CALLS
1. To answer a call, press any key except 
, 
or 
.
STANDBY MENU
STO FIND PSE
PAUSE INPUT:
1 : PREFIX
2 : HARD PAUSE
3 : TIME HYPHEN
DURING CALL MENU 1 : MUTE
2 : SILENT
3 : SEND MY PHONE #
4 : MY PROFILE
5 : VOICE PRIVACY
6 : LOCATION
2. To end the call, press
.
NOTE: Calls can be automatically answered by activating the “ANSWER MODE” function. (Refer to page 82)
CALLER ID
Identifies caller by displaying that person’s phone num- ber. If the caller’s name and number are stored in your phonebook, the name and number from the memory
3. To dial, press 
. To store, press 
.
HARD PAUSE: If you enter the pause character (P), the number entered after the pause character will be sent after the number dialed.
TIME PAUSE: If you enter the pause character (T), the number entered after the pause character will be sent after 2sec/unit.
location are displayed.
NOTE: • The Caller ID numbers are saved in the call log. Caller ID is a system dependent feature. Please contact your service provider for details. (Refer to page 30)
•Calling name(CNAP) is not stored in recent call and in phonebook.
If the call is received with Secret :
1.The name will not be displayed and ringer will be a basic one.
2.The call will make after inputting password on phonebook.
Page 22 - Chapter 2 | Chapter 2 - Page 23 |
