SETTING
FADE ALERT
Sounds an alert when entering an area where calls
cannot be made due to weak signal strength. The alert
sounds when standby mode or during a call:
1. Press .
2. Select “OFF” or “ON” with the navigation key, then
press to save it.
LOW SIGNAL ALERT
To set an alert to sound when you encounter low signal
strength during a call. The alert sounds when standby
mode or during a call:
1. Press .
2. Select “OFF” or “ON” with the navigation key, then
press to save it.
ON/OFF MELODY
To set melody “ON” or “OFF” when POWERON/OFF.
1. Press .
2. Select “OFF” or “ON” with the navigation key, then
press to save it.
Chapter 3 - Page 69Page 68 - Chapter 3
SETTING
ROAM RINGER
Reminds you that you are in a roaming service area
by sounding a different ringer from the set ringer for
incoming calls.
1. Press .
2. Select “DISTINCTIVE” or “NORMAL” with the
navigation key, then press to save it.
TONE LENGTH
Adjusts the tone length.
1. Press .
2. Select “NORMAL” or “LONG” with the navigation key,
then press to save it.
● Distinctive : Sounds a different ringer type.
● Normal : Sounds the same ringer type as used in
Home area.
CDM-8600BM7/22 2003.7.22 3:0 PM Page 70