TORECHARGEBATTERY

Your CDM-9000 has a built in charger function. To re-charge the Battery Pack, always install the Battery Pack to the phone.

1.Attach the Battery pack to the Phone

2.Insert the DC plug of the AC Adapter (CNR-4000) to the Desktop Holder (DTH-4000). Plug the AC Adapter to AC outlet.

3.Place the Phone with Battery Pack into the Desktop Holder.

4.Then the recharging starts. The display indicates “Now Charging” with animation. You can see a battery level

indicator scrolling at the upper-right of the display.

5.For complete recharging, it is recommended that the phone is turned off during recharging.

6.When the recharging is completed, the display indicates “Fully Charged”.

7.It is normal that Battery Pack may become a little warmer during recharging.

The charging time, from empty to full, depends on the environmental temperature, 0 to +35 °C.

Battery Type

Recharging Time

 

 

Slim Lithium Ion (BTR-

1.5-2 h

4000)

 

 

 

Extended Lithium Ion (BTE-

2.5-3.5 h

4000)

 

 

 

Alternatively you can recharge the Phone using AC Adapter as illustrated below.

NOTE: Do not feed the power to the phone without Battery Pack

Page 3
Image 3
Audiovox CMD-9000 operation manual Torechargebattery