, and press 
.
3.When the phone is operating in the Enhanced Privacy Mode, “ VP” appears in the upper line of the display during talking.
4.To request the cellular system not to use the enhanced voice privacy service, select “ STANDARD” with 
or
, and press 
.
Notes: 1. This feature must be activated before the call is initiated.
2.Even if the standard mode is selected the cellular system may direct the phone to use the Enhanced Voice Privacy Mode.
Anti Fraud Security Features
Your new Audiovox Cellular telephone has been engineered with the latest technology to help protect from the fraudulent use of your cellular telephone number. You phone is equipped with Authentication and PIN (Personal Identification Number) Dialing. (Availability of these features depends on your Service Provider). Should your Service Provider require use of a PIN, your PIN can be sent manually or programmed into the phone for more convenient use.
To Place a Call with the Manual PIN Entry
1.Enter the number you are calling, or recall the number from a specific memory location.
2.Press 
. Your call will be processed. Listen for a double beep, which will prompt you to send your PIN.
3.Enter your PIN number, and press 
. Your call will then be placed.
To Place a Call with the Automatic PIN Feature
1.Enter the number you are calling, or recall the number from a specific memory location.
2.Press “ SEND” key 
. As your call is being processed, you will have the display:
3.Press “ SEND” key 
again. Your call will then be placed.
Note: Before you can use this feature, you must program your PIN and turn the Automatic PIN feature on. (See procedures below.)
To Place a Call to Voice Mail using the Automatic PIN Feature
1.Press 
for more than one second. As your call is being processed, you will have the display:
2.Press 
again, your PIN will be sent.
3.Press 
again. The second number is stored in 
will be sent in Touch Tone™ signals. The subsequent
numbers, if any, can be sent sequentially by pressing 
.
