Audiovox manual Initiating Your Sprint PCS Vision Smart Device, Getting to know Your PPC6600

2.1Initiating Your Sprint PCS Vision Smart Device

Turning Your PPC6600 On and Off

To turn your device on:

Press the Power Button on the top of the device. (The PPC6600 will power up and, if this is

the first time it has powered up, will automatically begin the initiation/calibration process. See below for further details.)

To turn your device off:

Press the Power Button on the top of the device.

Note:

Turning your device off doesn’t turn the phone off. To turn

the phone off, press and hold for two seconds.

Tapping, Calibrating, and Re-calibrating the Touch Screen

When you first start up your PPC6600, you will be asked to calibrate the screen by tapping the center of a cross with your stylus as it moves around the screen. This process ensures that when you tap the screen with your stylus, the item tapped is activated.

To re-calibrate the screen:

If your device does not accurately respond to screen taps, you will need to recalibrate it.

1.Tap > Settings > System tab > Screen.

2.Tap the Align Screen button on the General tab to recalibrate the screen as described above.

Note:

When aligning the touch screen, tap the target firmly and accurately.

Section 2: Getting to know Your PPC6600 15