Audiovox PPC6600 manual Keypad Tone, Add Ring Tone

Add Ring Tone

Add RingTone allows you to quickly find and display all the ring tones stored on your device, gives you the option to listen, and then add or remove them from the Phone Settings list mentioned above.

1.To display all ring tones on your device, you can

tap > Settings > System tab > Add Ring Tone. (The program will automatically list and display all the .wav and .mid files on your PPC6600.)

2.After the ring tones have loaded, you can see that some are already selected; these are presently listed in the phone settings.

3.To play a ring tone, select one by tapping it, and then tap play. If you don’t like the ring tone, deselect it; this will add/ remove the selected/deselected ring tones from the list in your phone settings.

Keypad Tone

You can change the tone you hear when entering a phone number on the keypad. If set to Tones, the tone is heard continuously for as long as the number on the keypad is pressed. If set to Beep, the tone is heard only for one or two seconds.

1.Tap the Keypad list, then select the option you want.

2.To prevent tones from being heard when entering a phone number, select Off.

Section 6: Personalizing Your PPC6600 72