Audiovox PPC6600 manual To set up an e-mail service, Exploring Messaging

9.1 E-mail Messages: Using Messaging

You can set up a connection to an e-mail server so that you can send and receive e-mail messages by using a modem or network connection and Inbox on your device.

Note:

The ISP or network must use a POP3 or IMAP4 e-mail server and an SMTP gateway.

You can use multiple e-mail services to receive your messages. For each e-mail service you intend to use, first set up and name the e-mail service. If you use the same service to connect to different mailboxes, set up and name each mailbox connection.

To set up an e-mail service:

1.Open Messaging on your device, tap Accounts, and then New Account. Follow the directions in the New Account Wizard.

2.Fill in your e-mail address then tap Next.

Tapping Next will initiate auto-configuration, which attempts to connect your PPC6600 to your e-mail server and automatically download the necessary e-mail connection settings.

If auto-configuration is successful, you can skip steps 3-6 and immediately begin sending/receiving e-mail.

If auto-configuration is unsuccessful, you will need to complete steps 3-6 to manually enter the settings.

3.Enter your name, User name and Password, then tap Next.

4.From the drop down menu select the Account type that your e-mail provider supports (POP3 or IMAP4).

5.Enter a Name for your e-mail account then tap Next.

6.Enter your e-mail provider’s server name information for Incoming mail and Outgoing mail, then tap Finish.When finished, to connect to your e-mail server, tap Accounts, and then Connect.

Section 9: Exploring Messaging 109