Avalon Stoves 745, 790 owner manual Optional Equipment, Pedestal

Optional Equipment 37

Stove Leg Installation (Brass # 99200500, Cast Black # 99200800, Sculptured # 99200105)

Raise the stove 8" (use lumber). Attach each leg following the instructions below.

Attach each leg to the stove by inserting a bolt and washer through the hole or slot in the leg and into the threaded hole on the stove.

9/16" Socket Wrench

These rubber-tipped bolts are for leveling the stove. Make sure they contact the floor. Do not adjust with weight on the legs, the rubber tips may tear.

Pedestal (Part # 99200106)

IIf using outside air with the pedestal, follow the directions on the following page under "Outside Air Installation" prior to installing the pedestal.

1Place the pedestal into position on the floor protection. Lift the pedestal up and insert the two dowels included with this kit onto the forward and rear edge of the pedestal base.

2Lift the stove onto the pedestal base. Line up the press-nuts on the bottom of the stove with the two attachment brackets on the pedestal. Insert the two bolts, with washers, through the brackets on the pedestal and into the stove. Tighten the bolts with a 9/16" wrench.

! Mobile Home installations require the pedestal to be attached to the floor (use the lag bolts).

Two pedestal bolts attach the pedestal to the bottom of the stove (NOTE: two different bolt sizes are included

-use the correct pair for your application).

9/16" Wrench

The dowels insert onto the front and back edge of the pedestal base.

Stove

These brackets are provided for early model stoves.

The lag bolts and washers may be inserted through these holes to anchor the pedestal to the floor.

Pedestal

Travis Industries 93508133 4 020509