The View Administrative Option
Issue 2.2 April 2005 65
The View Administrative Option
If you are using static addressing and encounter problems, use the following procedure to veri fy
the current values of system parameters and file versions.
Note:
Note: Also use the ADDR option to view IP addresses. See Static Addressing
Installation in Chapter 3: Local Administrative Options. The IP addresses might
have been entered incorrectly. Verify whether you were provided with correct IP
addresses.
The 4601 IP Telephone does not support the V I E W option.
1. While the phone is on-hook and idle, press the following sequence of keys on the faceplate
of the telephone:
Mute 8 4 3 9 # (Mute V I E W #)
Note:
Note: Press the Mute button momentarily. Do not press this key while pressing other
keys. The 4630/4630SW IP Telephones and the 4690 IP Conference Telephone
do not have a dedicated Hold button. For all other 4600 Series IP Telephones,
pressing the Hold button instead of the Mute button also works.
The following text displays left-justified at the top of the display:
2. Press the * button at any time during viewing to display the next name and system value
pair from Table 1. The first pair returns after the last pair displays.
Press the # button at any time during viewing to terminate the procedure and restore the
user interface to its previous state. The names and values display in the following order:
View settings
*=next #=exit
Table1: Parameter Values
Name System Value Format
Model 46ccDccc Up to 8 ASCII graphics characters.
Market domestic
export Only one value displays.
Phone SN cccccccccccc
cccccccc Phone Serial Number, up to 18 ASCII
graphic characters.
1 of 2