AVE VSI-Pro Max Text Display, Choices NONE, 6, 12, 20, 30, 60, 120, 180, Display Character / Line

PROGRAMMING

5.5 TEXT DISPLAY

This menu will give you more control over the actual text block formatting and its appearance on the screen.Toaccess the menu, press the “Up” or “Down” button to move the cursor to “TEXT DISPLAY” and press “Set”. The following sub-menu will appear:

SCREEN BLANK

SCREEN BLANK	20
DISPLAY LINES	10
DISPLAY CHARACTER/LINE	40
DISPLAY FORMAT	TOP
LINE COMPRESS	OFF
SPACE COMPRESS	OFF
LEFT JUSTIFIED	OFF
SCROLL DELAY	OFF
DISPLAY	ON
EXIT
Figure 61: Text Display Sub-Menu

Choices: NONE, 6, 12, 20, 30, 60, 120, 180, 300

This is the amount of time that the VSI-Pro text display will remain on-screen after a transaction before blanking itself off (not the video picture, just the register transaction data) until the next transaction.

To change the SCREEN BLANK setting, press the “Up” or “Down” button to move the cursor to “SCREEN BLANK” and press “SET”. The cursor will begin flashing. Press the “Up” or “Down” buttons to cycle through the selections.

Press “Set” when the desired time is displayed. The cursor will stop flashing and you may continue programming.

NOTE ? Choosing “NONE” means No Blanking. The VSI-Pro will display the last

transaction until a new transaction is performed.

DISPLAY LINES

You have the choice of how many lines of text to display on-screen for register transactions. The choices are up to 11 lines.

To change the DISPLAY LINES setting, press the “Up” or “Down” button to move the cursor to “DISPLAY LINES” and press “Set”. The cursor will begin flashing. Press the “Up” or “Down” buttons to cycle through the selections. Press “Set” when the desired number is displayed. The cursor will stop flashing and you may continue programming.

NOTE ?All register transaction data will scroll up regardless of the number of lines you choose to

display on-screen and the more lines you display on-screen, the greater the amount of time that the transaction data will be recorded. However, some applications may limit the number of lines and the size of the on-screen display. If you are using an on-screen title, it will occupy Line 1, leaving 10 lines for the text insertion. If you enable the on-screen Time/Date then this takes one additional line also.

DISPLAY CHARACTER / LINE

This setting allows you to change the number of characters per line from 10 to 40.

VSI-Pro Max POS / Cash Register Interface

28