AVE VSI-Pro Max operation manual RX Baudrate Auto TX Baudrate, 2400, RX / TX Test

PROGRAMMING

TRANSMIT [ TX ] TEST

The purpose of this test is to determine that if the VSI-Pro is able to transmit data or not. Press the “Up” or “Down” button to move the cursor to “TRANSMIT [ TX ] TEST” and press “Set”. The following display will appear (example only):

RX BAUDRATE :			AUTO
TX BAUDRATE :		2400
PARITY :			NONE
DATA BIT :					8
HANDSHAKING :				OFF
TRANSMITTING :
BAUDRATE	DETECTION..

Figure 79: TRANSMIT [ TX ] TEST Display

If VSI-Pro transmitting data you will see some predefined ASCII character on the screen. If you don’t see any characters on the screen, check the connections and try again.

Press “Set” to return to the previous menu.

RX / TX TEST

In the RX/ TX test the VSI-Pro echos whatever it receives. Press the “Up” or “Down” button to move the cursor to “RX/ TX TEST” and press “Set”. The following display will appear (example only):

RX BAUDRATE :

TX BAUDRATE :

PARITY :

DATA BIT :

HANDSHAKING : ECHOING :

BAUDRATE DETECTION..

AUTO 2400 NONE

8

OFF

Figure 80: RX /TX TEST Display

Press “Set” to return to the previous menu.

BAUD RATE SCAN

The Baud Rate Scan test can scan the baud rate of your register. Press the “Up” or “Down” button to move the cursor to “BAUD RATE SCAN” and press “Set”. The following display will appear (example only):

RX BAUDRATE :

TX BAUDRATE :

PARITY :

DATA BIT :

HANDSHAKING :

BAUDRATE SCAN : BAUDRATE DETECTION..

AUTO 2400 NONE

8

OFF

Figure 81: Baudrate Scan Display

Enter a transaction from the register. The VSI-Pro will detect the baud rate and display it in front of RX Baud rate. Press “Set” to return to the previous menu.

EXIT

Press the “Up” or “Down” button to move the cursor to “EXIT” and press “Set” to return to the previous menu.

VSI-Pro Max POS / Cash Register Interface

48