AVE VSI-Pro Max operation manual Tcpip 232 Adapter Appendix K, Tcpip DB-9M, Rxd Txd Gnd

TCPIP 232 ADAPTER APPENDIX K

TCPIP 232 ADAPTER

Interfacing the VSI-Pro Max to the cash register TCP/IP network requires the TCPIP 232 Adapter along with the VSI- Pro Max. The IP address of the cash register is programmed into the TCPIP 232 Adapter via on-screen program- ming. The cash register LAN cable is plugged into the adapter and the supplied additonal LAN cable is then plugged into the cash register. Therefore this DOES NOT require an additional network port for the cash register interface or any host programming of the router or switch. The TCPIP232 Adapter is not AutoSense so make sure the router is set for MDI so normal straight thru cables are used.

Figure 129: Front of TCPIP 232 Adapter Figure 130: Rear of TCPIP 232 Adapter

WAVE TRANSFORMER

			DC CABLE
	TCPIP 232	VSI-PRO		RG-59U
CASH REGISTER	ADAPTER				MONITOR

RG-59UCAMERA

Figure 131: VSI-Pro Connections with TCPIP 232 Adapter

The pin-out between the TCPIP 232 Adapter and the VSI-Pro is as follows:

TCPIP (DB-9M)	VSI-Pro (DB-9M)
RXD 2		3 TXD
TXD 3		2 RXD
GND 5		5 GND

Figure 132: Pin-Out for TCPIP 232 Adapter to VSI-Pro Max

VSI-Pro Max POS / Cash Register Interface

70