AVE VSI-Pro Max operation manual VSI-Pro Firmware Download Menu, Download Setup

PROGRAMMING

VSI-Pro Firmware Download Menu

To update the VSI-Pro Max, load the VSI-Pro Max Firmware Download Utility and follow the instructions below. Then select “UPDATE FIRMWARE” from the menu selection.

	DOWNLOAD SETUP
	UPLOAD SETUP
Figure 96: Update Firmware	UPDATE FIRMWARE
	EXIT
Sub-Menu

VSI-Pro Max Firmware Download Utility

This document describes the VSI-Pro Max V14 Release 12. This feature allows a user to download firmware update via the RS-232 port. The LDROM 4K boot strap loader must be burner to the uP via a conventional programmer. Then the executable program is then loaded via any terminal program such as Hyper Terminal via a PC or compat- ible device. All firmware files are encoded to the AVE proprietary format and decoded by the bootstrap loader for standard program execution.

Update Firmware of VSI-Pro Max

You have to connect the VSI-Pro Max with a Serial Program Terminal such as HyperTerminal, IC etc. But advise to use HyperTerminal.First, you have to set the baud rate HyperTerminal to 19200

See PC Windows below to verify proper HyperTerminal setup.

Figure 97: HyperTerminal Main Menu

VSI-Pro Max POS / Cash Register Interface

56