S e t t i n g U p t h e 9 4 6 0 ™ P r i n t e r
Use these instructions to set up a 9460 printer using the printer’s RF Network menu in the printer’s Tool Box.
1. Turn on the printer by pressing and holding the power button (P) until the display turns on. The display flashes printer version information and battery charging status.
E B F
Init Radio……….
When you see “Init Radio”, the printer is waiting for the wireless print server to initialize. Next, you may see
Ready
p<T>
Display Indicates
Ready The printer is in Ready mode to send and receive data.
<T> The printer is connected to a network 
to print a network information label with the device name, IP address, and MAC address as a bar code. See “Printing a Network Information Label” for more information.
Press any button to return to Ready mode.
The printer is not connected to a network. 2. Press A under p.
E B F
R X T
You see the battery indicator E (empty) and F (full). As you use the printer, the battery indicator line gets closer to E (empty), instead of F (full). Recharge the battery when the line is by the E.
3. Press T (Tool Box) to enter the menu.
Tool Box
Language
ED
4. Tool Box is highlighted. Press E to select Tool Box.
Enter Password
5. Press the navigational buttons in this order: Left, Left, Left, Right, and Left.
Diagnostics
Online Diag.
ED