P r i n t i n g I n f o
Do not use supply smaller than 2012 or information may print off the label.
1. From the RF Network (9460) or Network (9493) menu, select Print Info. Three wireless network information labels print.
The first label contains radio version information. The second label contains the RF (wireless) settings, including the SSID, security, and signal strength.
The third label contains TCP/IP settings, including the IP address, boot method, etc.
2. Press the navigation button to return to the RF Network or Network menu.
Resetting the Radio
After you save the configuration, you must reset the radio before the changes take effect. When you select “Reset,” the radio reinitializes.
Note: You may lose your current connection and application. Resetting the network may take up to one minute before you can access the wireless print server (radio).
3. From the RF Network or Network menu, select Reset. You may see:
4. For the 9460, press any navigation button to return to the RF Network. The 9493 returns to the Network menu automatically.
Monarch Print Server Status
MAC: | ||
Printer Model: | 9493SNP |
|
Boot Ver : | 1.0 |
|
.06.10) | ||
Label 1 | |
| |
Wireless Information | |
SSID: | MON 123 |
Mode: | INFRASTRUCTURE |
Speed: | 54 mbps |
Security: Disabled | |
Sig. Strength: | 51 |
Actual SSID: | MON 123 |
Assoc. AP MAC: | |
|
|
| Label 2 |
|
|
TCP/IP |
|
IP Address: | 192.0.0.192 |
Subnet Mask: | 255.255.255.0 |
Router: | 192.0.192.0 |
(set manually) |
|
Boot Method: | STATIC |
Boot Retries: | 4 |
Timeout: | 0 min |
Keepalive: | 1 min |
|
|
Label 3
Configuring the 802.11b/g and IP Settings