S e t t i n g U p t h e 9 4 9 3 ™ P r i n t e r
Use these instructions to set up a 9493 printer using the printer’s Network Setup menu.
1. Turn on the printer by pressing p.
The display flashes printer version information and battery charging status. Then you may see
The J indicates the wireless signal strength.
Note: When using wired Ethernet, connect the network cable before you turn on the printer. The print server cannot detect the connection if the printer is already on.
Display Indicates
Ready | The printer is in Ready mode to send and receive data. |
MThe printer is connected to a network 
to print a network information label with the device name, IP address, and MAC address as a bar code. See “Printing a Network Information Label” for more information.
Press E to return to Ready mode.
JShows the wireless signal strength between the printer and the network.
NThe printer is not connected to a wireless network.
NThe printer is connected to a wired Ethernet 802.3 network. Press A under n to display the printer’s IP address. Press I then E to view network information. Press 
to print a network information label with the device name, IP address, and MAC address as a bar code. See “Printing a Network Information Label” for more information.
Press E to return to Ready mode.
MThe printer is not connected to a wired Ethernet network.
2. Press A under P.
You see the Pause screen with the battery indicator E (empty) and F (full). As you use the printer, the battery indicator line gets closer to E, instead of F. Recharge the battery when the line is by the E.
Configuring the 802.11b/g and IP Settings