3. Press U or D to select the PSP algorithm you need.

4. Press e to save the setting and return to the Configure menu. Press X to exit without saving changes.

Setting the Port

This option sets the port. The default port is 9100. 1. From the Configure menu, select Port.

2. Press D or U to increase or decrease the highlighted number. Press L or R to highlight a different number.

3. When you are finished, press R until you see e. Press e to save the setting and return to the Configure menu. Press X to exit without saving changes.

Setting the SSID

This option sets the SSID. The SSID is case-sensitive.

1. From the Configure menu, select SSID.

The default or last-saved SSID appears, for example:

2. Press D or U to change the highlighted character. Press L or R to highlight a different character.

3. When you are finished, press R until you see e. Press e to save the setting or press X to exit without saving changes.

Enabling Ad-Hoc Mode

The default mode for the radio is infrastructure (access point). You must enable Ad-Hoc mode to connect peer-to-peer.

1. In the Configure menu, Press D or U until AD HOC is highlighted.

2. Press e to enable AD HOC.

A checkmark appears when AD HOC mode is enabled. 3. Press E to return to the Network menu.

2-12System Administrator’s Guide