Use the A buttons as shown in the following table:
E | R | + |
Press A to | Press A to | Press A to |
|
|
|
Saves the setting | Scrolls through the positions | Increments the current position |
| from left to right | setting by 1 |
3. When the setting you want is displayed, press E to save the setting. You return to the Configure menu.
Setting the Subnet Mask
This option sets the printer’s subnet mask.
1. From the Configure menu, select Subnet Mask.
Subnet Mask 255.255.000.000
E R +
Use A as shown in the following table:
E | R | + |
Press A to | Press A to | Press A to |
|
|
|
Saves the setting | Scrolls through the positions | Increments the current position |
| from left to right | setting by 1 |
2. When the setting you want is displayed, press E to save the setting. You return to the Configure menu.
Setting the Gateway
This option sets the printer’s router (gateway) address. 1. From the Configure menu, select Gateway.
Gateway 000.000.000.000
E R +
Use A as shown in the following table:
E | R | + |
Press A to | Press A to | Press A to |
|
|
|
Saves the setting | Scrolls through the positions | Increments the current position |
| from left to right | setting by 1 |
2. When the setting you want is displayed, press E to save the setting. You return to the Configure menu.
Setting the Power Mode
This option sets the power mode.
3. From the Configure menu, select Power Mode.
Power Mode
XCAM
3 PSP
ED
The choices include CAM (Continuous Awake Mode) or PSP (Power Save Protocol). PSP conserves battery power. CAM means the printer is continuously receiving and transmitting data. This mode uses battery power quickly.