46AXIS 223M - System Options
Network - SNMP
The Simple Network Management Protocol (SNMP) allows the remote management of network devices. Select the version of SNMP to use, depending on the level of security required. HTTPS should be enabled when setting the password for SNMPv3.
Network - UPnP™
The camera includes support for UPnP™, which is enabled by default. If also enabled on your computer, the camera will automatically be detected and a new icon will be added to “My Network Places.”
Note: UPnP must also be enabled on your Windows XP or ME computer. To do this, open the Control Panel from
the Start Menu and select Add/Remove Programs. Select Add/Remove Windows Components and open the Networking Services section. Click Details and then select UPnP as the service to add.
Network - RTP (Multicast)/MPEG-4
These settings are the IP address, port number, and
Network - Bonjour
The AXIS 223M includes support for Bonjour. When enabled, the camera is automatically detected by operating systems and clients that support Bonjour.
Ports & Devices
I/O Ports
The two alarm inputs and one output on the AXIS 223M can be connected to various external devices, e.g. door sensors and alarm bells. The name given to the ports can be changed and state of the I/O ports can be set to Open circuit or Closed circuit.
The pinout, interface support and the control and monitoring functions provided by this connector are described in Unit Connectors, on page 51.
COM Ports RS-485/422 & RS-232
The
It is possible to configure COM Ports
